Ember Mod by Element mods (clone)
After the Tree of life mod, comes the Ember mod, well this is almost a brass tree of life to be
honest, there is a very slight difference in the design of the locking ring and top cap,if
you look really hard, that said it is still a nice thing with copper pins,good threads
and adjustment for battery rattle.
I like the brushed brass finish on this one and it helps with the dreaded finger prints.
all the engravings are nice and deep.
all in all a nice day to day mod
510 threading connection
Adjustable 510 center pin (positive contact)
Bottom spring-loaded firing button, with reverse-threaded
Powered by single 18650/18500/18350 battery
where from $27.38 Element Style Mechanical Mod – 18650/18500/18350 / brass at FastTech – Worldwide Free Shipping
Big Nasty 26650 by fasttech
well it’s big but not so nasty good threads, and copper pins so it hits good and hard.
good airflow channels on the top cap and a nice smooth locking ring
and how it looks with a atty on top.
with 26650 on board this could be the answer to all those moments you run out of battery, and because of the shape it feels so nice in the hand. https://www.fasttech.com/p/1693400 £14.38 freepost
If you like copper mods then this might well be for you is all copper tubes,caps,pins
and did i say it’s copper lets have a look……….
this is a real looker and nicely finished as well
it’s got the normal adjustable top pin,locking ring, and yes it hits really hard as you would expect from a mod like this,
the threads are good not fine and sticky like some copper mods but smooth,
and just as an aside you can mix and match the bits(tubes,caps) with the brass and stainless steel one’s from the same place.
so all in all i am glad i added this to my collection
from here freepost $24.37 Panzer Style Mechanical Mod – 18650/18500/18350 at FastTech – Worldwide Free Shipping
Brass V3tronix Flip (clone)
I was always going to buy this just for looks alone, i personally prefer brass or copper mods to stainless steel so i went for the brass
and i was pleasantly surprised at the quality of this clone, no it’s not as good as the original but as a cost cutting exercise i don’t
think you would mind.
the engraving is of good quality not maybe as sharp as the original but a good effort by any measure.
Brass pins instead of the original’s silver plated but still not the end of the world.
It has super smooth threads and all the machining is good and clear of any crap.
on the left in 18650+kick mode and on the right in 18500 mode with atty.
510 floating pin
Brass contacts (positive contact adjustable)
3 vent holes on the body
Bottom spring-loaded firing button w/ a lock, (done right)
3 1/2 twists and one or two flips will convert the device to support different battery modes
CNC 3D engravings
Battery support: 18500, 18500+Kick, 18650, 18650+Kick (and Kick 2)
i think it’s another of the Marmite mods you will love it or hate it………………………….. and just to be different i like it a lot
Where from http://www.fasttech.com/products/0/10008109/1727600-v3-flip-style-mechanical-mod
Stingray X by JD Tech from Stingray X by JD Tech – SHMOvapes
I remember taking delivery of my copper/black from JD Tech and the feeling that it was a
bit different from other mods that were available at the time and absolutely loved everything
well i didn’t feel the same about the stainless steel or the brass stingray just my opinion,
but when i first saw pictures on the net of the Stingray X it felt the same as when i first saw
the copper/black it was a no brainer for me i just had to have one.
so lets have a look as it turned up and i am so pleased with it!
to say they have improved on the copper/black i think is fair, they have redesigned the firing button and the top cap and those two things make it feel
much better overall, better feel to the action on firing and shorter in height (4mm)
- Copper Body wrapped with polished 304 steel (18350/18490/18650)
- Copper Top Cap wrapped with 304 stainless steel with floating pin and vent holes
- Locking Ring polished 304 stainless steel – 3 entry threading for one locking motion
- Adjustable Battery Contact – copper and silver plated
- Bottom cap with ring made of 304 stainless
- Adjustable Magnetic Switch
- 4mm Shorter with new switch and top cap design
- Hybrid Adaptor
- Drip Tip
- Carry Bag
I still have my Stingray copper/black to this day and the Stingray X will be staying with it
both very much keepers!
i didn’t mention the quality of the finish as that is a taken!!
Raijin Mixed Mod (clone)
Now just let me say this upfront i think this is one of the best mods to come out of fasttech for a while now.
very nice engraving both on the tube and the bottom button, this is a 18650 mod just the one tube.
it’s got brass contacts and super smooth threads, bottom spring-loaded switch,
locking ring is reverse-threaded.
here it is with it’s matching atty.
not a lot more to say about this……….. keeper!
here is the link……. mod $20.52 Raijin Style Mixed Mechanical Mod – 18650 mod at FastTech – Worldwide Free Shipping
here is the link……. atty $8.55 Raijin Style Rebuildable Dripping Atomizer – 1.8ohm / stainless steel at FastTech – Worldwide Free Shipping
Lbaloi Telescoping Hybrid Mechanical Mod ( Clone)
Well the first thing to say about this is “It’s nuts”………….. No not “the nuts”……….. just “nuts”(although it is growing on me)
Its a strange looking hybrid dripper with 3 large posts and airflow control that works.
It has silver coated pins,locking ring (not reverse threaded) and a spring in the switch that works well.
To be honest this vapes very well and it will get all sorts of looks when you’re “out and about” with it.
It’s not going to be everyone’s cup of tea, but if you like the look of it you will love the vape.
All in all if you like the way it looks then Get it, it works Well
Where can you get it from $32.84 Lbaloi Style Telescoping Hybrid Mechanical Mod – 18500 / 18650 at FastTech – Worldwide Free Shipping