Ember Mod by Element mods (clone)
After the Tree of life mod, comes the Ember mod, well this is almost a brass tree of life to be
honest, there is a very slight difference in the design of the locking ring and top cap,if
you look really hard, that said it is still a nice thing with copper pins,good threads
and adjustment for battery rattle.
I like the brushed brass finish on this one and it helps with the dreaded finger prints.
all the engravings are nice and deep.
all in all a nice day to day mod
510 threading connection
Adjustable 510 center pin (positive contact)
Bottom spring-loaded firing button, with reverse-threaded
Powered by single 18650/18500/18350 battery
where from $27.38 Element Style Mechanical Mod – 18650/18500/18350 / brass at FastTech – Worldwide Free Shipping
Big Nasty 26650 by fasttech
well it’s big but not so nasty good threads, and copper pins so it hits good and hard.
good airflow channels on the top cap and a nice smooth locking ring
and how it looks with a atty on top.
with 26650 on board this could be the answer to all those moments you run out of battery, and because of the shape it feels so nice in the hand. https://www.fasttech.com/p/1693400 £14.38 freepost
If you like copper mods then this might well be for you is all copper tubes,caps,pins
and did i say it’s copper lets have a look……….
this is a real looker and nicely finished as well
it’s got the normal adjustable top pin,locking ring, and yes it hits really hard as you would expect from a mod like this,
the threads are good not fine and sticky like some copper mods but smooth,
and just as an aside you can mix and match the bits(tubes,caps) with the brass and stainless steel one’s from the same place.
so all in all i am glad i added this to my collection
from here freepost $24.37 Panzer Style Mechanical Mod – 18650/18500/18350 at FastTech – Worldwide Free Shipping
Brass V3tronix Flip (clone)
I was always going to buy this just for looks alone, i personally prefer brass or copper mods to stainless steel so i went for the brass
and i was pleasantly surprised at the quality of this clone, no it’s not as good as the original but as a cost cutting exercise i don’t
think you would mind.
the engraving is of good quality not maybe as sharp as the original but a good effort by any measure.
Brass pins instead of the original’s silver plated but still not the end of the world.
It has super smooth threads and all the machining is good and clear of any crap.
on the left in 18650+kick mode and on the right in 18500 mode with atty.
510 floating pin
Brass contacts (positive contact adjustable)
3 vent holes on the body
Bottom spring-loaded firing button w/ a lock, (done right)
3 1/2 twists and one or two flips will convert the device to support different battery modes
CNC 3D engravings
Battery support: 18500, 18500+Kick, 18650, 18650+Kick (and Kick 2)
i think it’s another of the Marmite mods you will love it or hate it………………………….. and just to be different i like it a lot
Where from http://www.fasttech.com/products/0/10008109/1727600-v3-flip-style-mechanical-mod